GMC Chevy Sierra 2500HD Silverado 3500HD 2in Wheel Spacers 8x180

Specifications: 1) Thickness: 2" / 50.8mm 2) Vehicle Bolt Pattern(PCD): 8x180mm 3) Wheel Bolt Pattern(PCD): 8x180mm 4) Hub Diameter: 124.1mm 5) Thread Size: 14x1.5 / M14x1.5 / 14mmX1.5 Note:Please make sure you take the proper neasurements gefore purchasing Package include: 4Pcs Wheel Spacers Adapters 1 x Protective Gloves 1 x Cleaning Wire Balls Vehicle Fitment Information: For Chevrolet: Chevrolet Silverado 2500 2011-2018 Chevrolet Silverado 2500 HD 2011-2024 Chevrolet Silverado 3500 2011-2018 Chevrolet Silverado 3500 HD 2011-2024 (SRW; Fits Non-Dually Models Only) For GMC: GMC Sierra 2500 HD 2011-2024 GMC Sierra 3500 HD 2011-2024 (SRW; Fits Non-Dually Models Only) The spacers will not fit Dually ModelsSpecifications: 1) Thickness: 2" / 50.8mm2) Vehicle Bolt Pattern(PCD): 8x180mm3) Wheel Bolt Pattern(PCD): 8x180mm4) Hub Diameter: 124.1mm 5) Thread Size: 14x1.5 / M14x1.5 / 14mmX1.5Note:Please make sure you take the proper neasurements gefore purchasing Package include: 4Pcs Wheel Spacers Adapters1 x Protective Gloves 1 x Cleaning Wire Balls Vehicle Fitment Information: For Chevrolet:Chevrolet Silverado 2500 2011-2018Chevrolet Silverado 2500 HD 2011-2024Chevrolet Silverado 3500 2011-2018 Chevrolet Silverado 3500 HD 2011-2024 (SRW; Fits Non-Dually Models Only) For GMC:GMC Sierra 2500 HD 2011-2024GMC Sierra 3500 HD 2011-2024 (SRW; Fits Non-Dually Models Only) The spacers will not fit Dually Models [Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.2. Measure the fender gap and stock bolt length to choose suitable thickness.3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)-- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.-- For 1 inch or less or special adapters, If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.-- For 2 inches or more or special adapters, If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small

size adapters or purchase longer studs yourself. What should I pay attention to during installation? 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.3) DO NOT proceed if both of the wheel spacer do not fit.4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.7)All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We only accept PayPal. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding.2.All Paypal Payments must be Confirmed. Payment must be made within 48hrs of the auction end time. Non-Paying bidders will be reported.3.When you get your package,maybe you will pay some charges, it's taxes for local customs,not pay to us, and the fees are depends on the customs, all buyer are same.Delivery details1.Items will be shipped within 2 business days after payment is received.2.We ship to your eBay address. Please make sure your eBay address is correct. Buyer takes responsibility if eBay address is wrong.3.Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country customs office for these additional charges.4.We shipping using UPS or USPS from our nearest warehouse to you. Tracking numbers will be emailed upon shipment.Terms of sales1.Please feel free to email us if you have any question.2.We appreciate you contact us via eBay message when you are not satisfied rather than open case or leave negative feedback directly. We'll try our best to solve the issue.3.Refund will be issued once we receive your returned items. Buyer is responsible for all return shipping charges.4.Please contact us for return process before you return the item.5.All items for exchange or refund must be returned in "as new" condition.About usWe are the responsible seller ,always provide high-quality products and best service you have any questions, please contact us, and will try our best to help you. Please contact us by eBay Message, and we will reply you within 24 hours. Thank you very much! Contact usWe are the professional auto parts manufacturer , and provide line lock, AN hose end fittings , fuel line , fuel filter , fuel regulator , exhaust cutout , exhaust tips , exhaust muffler and so on quality of the product to be secured. If you have any questions or any needs , please contact us , and will try our best to help you.