2Set Brake Bleeder Kit,Brake Fluid Bleeder Kit Includes 4PCS Brake Bleeder Hose

MAINTAINING PROPER OPERATION OF THE BRAKING SYSTEM WITH OUR FULL BRAKE BLEEDER KIT Product Information Inlet Hose Size: 6.02*0.24*0.24 inch Inlet Hose ID: 0.16 inch Outlet Hose Size: 13.77*0.32*0.32 inch Outlet Hose ID: 0.20 inch Check Valve Size: 2.08*0.50*0.50 inch Check Valve Inlet OD: 0.18 inch Check Valve Outlet OD: 0.22 inch Large Clamps Size: 0.56*0.54*0.32 inch Large Clamps ID: 0.31 inch Small Clamps Size: 0.48*0.42*0.24 inch Small Clamps ID: 0.24 inch Screw Caps Size: 0.47*0.47*0.44 inch Screw Caps ID: 0.23 inch Weight: 2.56 oz Color: Black Material: Rubber, Aluminum Packaging: 2x Inlet Hose, 2x Outlet Hose, 2x Check Valve, 4x Small Clamps, 2x Large Clamps, 6x Bleeder Screw Caps Note Please check that our brake bleed kit part sizes match your braking system before purchasing Product Feature Flexible Hose: Made of premium rubber material, flexible and elastic, not easy to be deformed even if bent at will Tightening Sealing Clips: Our sealing clips are made of aluminium material with super strong clamping force to avoid oil spillage from pipe connections during use One-Way Valve Design: The precision design avoiding old brake fluid backflow and air entry into the system Bleeder Screw Caps: The caps efficiently avoids dirt and grease from clogging the bleeder screws Product Installation 1. Open the brake air release nozzle of the caliper 2. Connect 2 hoses to the ends of the check valves 3. Connect one end of the hose to the nozzle and secure it with a valve clamp Note: The direction of the arrow on the check valve is the direction of brake fluid flow, and the nozzle should be connected to a hose that points in the opposite direction of the arrow 4. Release the brake bleeder and press the brake lever until there are no more air bubbles in the brake fluid 5. Fill the reservoir to suitable level