2.5" to 3" Silicone Reducer Coupler Turbo Hose 63mm-76mm with Clamps
This new 2.5" to 3" silicone reducer coupler turbo hose (63mm to 76mm) is designed to connect two different pipe sizes in a turbo or intake/intercooler setup. The listing includes the reducer coupler and two T-bolt clamps to help secure the connections. It may be suitable for universal applications where these diameters are required; check the listing for details on fitment, measurements, and any compatibility notes. Price is $17.99 USD, and it ships with free shipping as stated in the listing.
| Item ID | 316830082727 |
| Location | Florence US |
| Shipping | Free shipping (check listing for details) |
| Seller |
lencoolracing
99.8% positive · 13435 feedback
|
| Listing | FixedPrice · Active |
| Start time | 2025-05-19T21:00:00.000Z |
| T Bolt Clamp Material | 304 stainless steel, zinc plated nut |
| Items Included | Hose |
| Manufacturer Part Number | LK-SH63-76mm |
| Material | Silicone |
| Item Length | 3" or 76mm |
| Placement on Vehicle | Engine Compartment, Front, Inner, Left, Lower, Outer, Rear, Right, Upper |
| Brand | LencoolRacing |
| Type | Hose |
| Interchange Part Number | LK-SH63-76mm |
| Working Pressure | 0.3Mpa (43.5 PSI) to 0.9Mpa (130.5 PSI) |
| Manufacturer Warranty | 6 Months |
| Working Temperature | -50°C to 270°C |
| Features | Protective Sleeve Attached |
| Wall Thickness | 5 mm wall thickness, 4-ply reinforced |
| ID | 2 1/2"- 3" or 63mm-76mm |
| Universal Fitment | Yes |
| Finish | Glossy |
| Performance Part | Yes |
| UPC | 726223248486 |
This new 2.5" to 3" silicone reducer coupler turbo hose (63mm to 76mm) is designed to connect two different pipe sizes in a turbo or intake/intercooler setup. The listing includes the reducer coupler and two T-bolt clamps to help secure the connections. It may be suitable for universal applications where these diameters are required; check the listing for details on fitment, measurements, and any compatibility notes. Price is $17.99 USD, and it ships with free shipping as stated in the listing.
Before you buy
- Ungraded cards can vary—zoom in on photos for surface, corners, and centering.
- If it’s a “pick your card/insert” listing, confirm the exact card name/number in the listing.
- Review shipping rules (combined shipping / envelope vs mailer) on the listing.
2.5" to 3" Inch Silicone Reducer Coupler Turbo Hose100% New Items, Never Used Or Installed【 Size 】ID Size: 2.5" - 3" or 63 mm-76 mm.Length: 3 inch or 76 mm.Wall Thickness:5 mm wall thickness, 4-ply reinforced.【 Parameter 】Bursting Pressure: 2 Mpa.Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI).Working Temperature: -50°C to 270°C.【 Package Includes 】1 X 63 mm - 76 mm Silicone Hose.1 X 70 mm - 78 mm T Bolt Clamp.1 X 83 mm - 91 mm T Bolt Clamp.【 Advantage 】Direct replacement and perfect fit, without installation instruction.Silicone hose wall thickness up to 5mm, 4 layers, stable structure, made of new silicone material, more flexible and durable.Unlike other ordinary rubber tubes and silicone tubes with other materials, LencoolRacing silicone tube is more resistant to high and low temperatures.【 T Bolt Clamp material 】304 stainless steel, zinc plated nut【 Application 】Universal,such as Custom Turbo, Supercharger charge piping set up, custom compressor, inlet for turbocharged and supercharged cars, vehicles, boats etc.Silicone coupler Applied for engine’s intercooler or intake piping,radiator tube,turbo inlet/outlets,etc.【 Note 】This item is not suitable for fuel or oil transfer. All dimension are measured by hand, Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm). Lencool Racing provide the fitting 6-months warranty. Please check the
size before purchasing, if you have any further questions please contact us freely via eBay. We value your shopping experience and strive to provide quality product and service. All of our products come with 30-day Money Back Guarantee. Feel free to contact us if there is any questions! Please let us know before you send us the neutral/negative feedback that wont help to finish the issues. And I will definitely try my best to provide the best solutions which would meet your satisfactory.