6x Combo 9005+H11+H11 LED Headlight Conversion Kit Bulbs Hi/Lo Beam + Fog Light

Note:It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.1.Need Canbus Decoder/ Resistor: These LED bulbs can work well on most vehicles. But when they cause the flickering issue or error code on your vehicle, you will need one pair of the decoder （not included）to cancel the error. When you encounter undecoded problems, please do not open disputes or bad reviews, please contact customer service directly, we will solve the problem ASAP.2.Warm Tips:Some vehicles such as For Ford, For Chevy, For Dodge,For Jeep they may need this decoder (not included）to solve the flicker/error code problem, you can try the decoders to fix.If you need it, you can buy it locally or contact customer service to get a discount to buy it.Fitment system may not be 100% accurate, if you are not sure which bulb

size you need, please check vehicle manual or stock bulb model. Technical Specification:Plug Type: High+Low BeamLED Quantity(each bulb): 2pcs* 3570 CSP chipsLuminous Flux: 8000LM/set (4000LM/bulb)Operating Voltage: DC 12V(fit 12V vehicles)Color Temperature: 6000K WhiteIP67 rated water and dust seal, over 50000hrs lifetimeBeam Angle: 360 degreeMaterial: Aviation 6063 aluminum profileOperating Temperature: -40-80 degree CelsiusUsage: headlight,fog lightWattage:40WFog Light:-Number of chips: 10-Color: whiteSocket type: H11/H8Voltage: 12V-24VPower: 40WColor temperature: 6000KLuminous flux: 3000LMLife: 60000 hoursMaterial: aluminum alloyLife span: 60,000hrsAdvantage:*Latest 3570 chip(USA) light source, 2 luminous faces no blind zone*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light*6000K White light reflect road paint/signs better to show clearer road

situation during night driving*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic*Built-in constant current CPU, instant full brightness without start-up relayInstall Caution:1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.8.Please install car headlight dust cover to ensure the normal operation of the lampPackage Included:4Pcs LED Headlight Bulbs2Pcs LED Fog Light BulbsNew and old packaging will be shipped randomlyWARNING ABOUT POLARITYUnlike halogen bulbs, LED are polarity sensitive.BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.- if your light turns on, please proceed to install both bulbs onto your vehicle.- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. .dc_tracker_img:last-of-type p:empty+hr hr+span.ebay,hr+*>span.ebay On Apr 17, 2025 at 02:06:15 PDT, seller added the following information:.dc_tracker_img .dc_tracker_img:last-of-type p:empty+hr hr+span.ebay,hr+*>span.ebay