Wireless Security System Alarm Siren Kit with Motion & Door Sensors

Overview: - DIY alarm system with the capability to add up to 40 sensors, 10 remotes, and 10 doorbell buttons. - Programmed and ready to use right out of the box. - Inexpensive and simple intruder alarm system - Can be easily transported and set up in different locations - No network, GSM, or Wi-Fi capabilities required - Press the "S" button on the remote to trigger the panic alarm Suitable Applications: - Sheds, garages, barns, shops, single-story homes, cabins, RVs, and other small spaces that need protection Overview:- DIY alarm system with the capability to add up to 40 sensors, 10 remotes, and 10 doorbell buttons.- Programmed and ready to use right out of the box.- Inexpensive and simple intruder alarm system- Can be easily transported and set up in different locations- No network, GSM, or Wi-Fi capabilities required- Press the "S" button on the remote to trigger the panic alarm Suitable Applications:- Sheds, garages, barns, shops, single-story homes, cabins, RVs, and other small spaces that need protection Technical Specifications:- Dimensions: 12mm x 10.2mm x 11mm- Power: AC 110V to 220V, 92cm/3ft power cable (can be extended)- Wireless frequency: 433MHz- Operating environment: -15°C to 55°C, 40% to 70% relative humidity- Typical wireless range: 328ft (100m) in open areas, reduced by obstacles Siren- Can pair with up to 40 wireless sensors and 10 remote controls- Alarm volume up to 115dB- Wireless range of approximately 100m, reduced by obstacles Remote Control:- Arm: Activates the alarm, triggering siren if sensors are tripped- Disarm: Deactivates the alarm and stops the siren- SOS: Triggers the siren alarm for emergency assistance- Test: Sounds a "Didi-Didi" test beep from the siren Motion Detector:- Detection range: 6-8m- Vertical angle: 60 degrees- Horizontal angle: 110 degrees- Adjustable sensitivityDoor Sensor:- Triggers siren instantly when separated by over 1mm from the magnetic strip Setup and Usage: 1. Connect the siren unit to a power outlet.2. Remove the insulation strip from the alarm sensors to activate them. - Door/window sensor will flash once when turned on. - Open the motion detector, check battery polarity, then turn it on.3. Mount the sensors in the desired locations, drilling may be required for the motion detector. Pairing Process: 1. Connect the siren to power, wait 6 seconds.2. Disconnect and reconnect the siren's power 3 times. - The siren will beep each time.3. After the 3rd beep, the siren will enter pairing mode.4. Pair the sensors: - Motion detector: Turn it on to pair. - Door/window sensor: Separate it from the magnet. - Remote: Press any button to pair.5. Once all devices are paired, disconnect the siren's power to exit pairing mode.6. Reconnect the siren to complete the setup. Sensor Specifications:- PIR Sensor: - 110° horizontal, 60° vertical detection angle - Detect distance: 0-8m Key Features:- Weatherproof design- No GSM card, WiFi, or app required- No ongoing subscription fees Q&A: Q: Do I need to order an alarm panel (control center) for this siren? A: No, this siren work as an alarm system, it can work with wireless sensors to protect your house. Q: Does this siren system support add extra sensors or remote controllers?How many? A: Yes! This siren alarm system can work with 6 remote controllers and 30 wireless sensors like wireless gas detectors, smoke detectors, co carbon detectors, door/window sensors, pir motion detectors, water leakage sensors, vibration sensors and glass break detectors and so on. Q: Can I control 2 or more sirens by using 1 remote controllers or more? For example, I have 6 rooms and want to install 6 sirens and all control by 2 or more controllers? A: Yes! User can use 1 remote controller to control 2 or more siren systems, or 1 sensors work with 2 or more siren.