1Gb/2.5Gb/5Gb/10Gb Base-T PCI-e Network Card PCI Express Ethernet Adapter

1Gb-1G NIC-RTL8111H Arm Your PC with the WAVLINK 1G PCI Express Network CardFeaturing the high-performance Realtek 8111H controller chip and utilizing cutting-edge 1G Base-T technology, this adapter offers speeds 10 times faster than conventional 100Mbps adapters. It supports backward compatibility with various data rates (1000/100/10Mbps Base-T connections). Alongside the standard bracket, a low-profile bracket is included for mini-tower computer cases.Excellent Heat SinkOrgan cooler design for fast heat dissipation and stable network card performance.RTL8111H ChipsetIt enhances data transfer speeds, supports various data rates, and provides stable and reliable network transmissions.Seamless Upgrade, No Cable ChangesThis card works with CAT5E cables, eliminating the requirement for expensive CAT6 cables.Thickened Golden FingerThickened golden finger, good conductivity, strong antioxidant, faster and more stable.Installation Steps1. Power off the PC, open the case, find one available PCIe slot.2. Insert the PCIe into the corresponding slot. Works with PCIe x1, x4, x8, x16.3. Fix the baffle with screws and insert an ethernet cable to the RJ45 port. 4. Download and install the driver from REALTEK official website. Setup is done.SpecificationModel: WL-NWP001Chipset: RTL8111HExtend Port: 1* RJ45 Ethernet portItem Weight: 43g/1.5ozLED: 1 x Link(Green), 1 x Ethernet (Yellow)Operating System : Windows 11/10/8/8.1/7/XP/Vista, LinuxProduct Dimensions: 120*70*55mm/4.7*2.8*2.2inchesPCIe Ethernet Card: Supports 10/100/1000Mbps speedCompatible for X1,X4,X8,X16, both a standard and low-profile bracket are providedWarm Tips:☺The PCIe interface compatible with PCI-E slots only, not for PCI slots.☺We put plastic film on its PCI-e interface for protection before the product is shipped. Please remove it before connecting to the PC's PCI-e slot.Package Includes1 x 1Gbps PCIe Network Card1 x Low-Profile Bracket2 x Screws1 x Quick Start Guide2.5Gb-2.5G NIC-RTL8125B Arm Your PC with the WAVLINK 2.5G PCI Express Network CardFeaturing the high-performance Realtek 8125B controller chip and utilizing cutting-edge 2.5G Base-T technology, this adapter offers speeds 2.5 times faster than conventional gigabit adapters. It supports backward compatibilitywith various data rates (2500/1000/100/10Mbps Base-T connections). Alongside the standard bracket, a low-profile bracket is included for mini-tower computer cases.Excellent Heat SinkOrgan cooler design for fast heat dissipation and stable network card performance.RTL8125B ChipsetIt enhances data transfer speeds, supports various data rates, and provides stable and reliable network transmissions.Seamless Upgrade, No Cable ChangesThis card works with CAT5E cables, eliminating the requirement for expensive CAT6 cables.QoS SupportQuality of Service technology delivers prioritized performance for gamers and ensures to avoid network congestion for PC gaming.Installation Steps1. Power off the PC, open the case, find one available PCIe slot.2. Insert the PCIe into the corresponding slot. Works with PCIe x1, x4, x8, x16.3. Fix the baffle with screws and insert an ethernet cable to the RJ45 port. 4. Download and install the driver from REALTEK official website. Setup is done.SpecificationModel: WL-NWP002Chipset: RTL8125BExtend Port: 1* RJ45 Ethernet portItem Weight: 43g/1.5ozLED: 1 x Link(Green), 1 x Ethernet (Yellow)Operating System : Windows 11/10/8/8.1/7, LinuxProduct Dimensions: 120*70*55mm/4.7*2.8*2.2inchesPCIe Ethernet Card: Supports 10/100/1000Mbps/2.5Gbps speedCompatible for X1,X4,X8,X16, both a standard and low-profile bracket are providedWarm Tips:☺The PCIe interface compatible with PCI-E slots only, not for PCI slots.☺We put plastic film on its PCI-e interface for protection before the product is shipped. Please remove it before connecting to the PC's PCI-e slot.Package Includes1 x 2.5Gbps PCIe Network Card1 x Low-Profile Bracket2 x Screws1 x Quick Start Guide5Gb-5G NIC- RTL8126 Arm Your PC with the WAVLINK 5G PCI Express Network CardFeaturing the high-performance Realtek 8126 controller chip and utilizing cutting-edge 5G Base-T technology,this adapter offers speeds 5 times faster than conventional gigabit adapters. It supports backward compatibilitywith various data rates (5000/2500/1000/100/10Mbps Base-T connections). Alongside the standard bracket, a low-profile bracket is included for mini-tower computer cases.Excellent Heat SinkOrgan cooler design for fast heat dissipation and stable network card performance.RTL8126 ChipsetIt enhances data transfer speeds, supports various data rates, and provides stable and reliable network transmissions.Seamless Upgrade, No Cable ChangesThis card works with CAT5E cables, eliminating the requirement for expensive CAT6 cables.USB Flash Drive IncludedUsers can simply plug in the USB drive to install the driver and start using it without any complicated procedures.Installation Steps1. Power off the PC, open the case, find one available PCIe slot.2. Insert the PCIe into the corresponding slot. Works with PCIe x1, x4, x8, x16.3. Fix the baffle with screws and insert an ethernet cable to the RJ45 port. 4. Insert the USB flash drive to install the driver. Setup is done.SpecificationModel: WL-NWP003Chipset: RTL8126Extend Port: 1* RJ45 Ethernet portItem Weight: 43g/1.5ozLED: 1 x Link(Green), 1 x Ethernet (Yellow)Operating System : Windows 11/10, LinuxProduct Dimensions: 120*70*55mm/4.7*2.8*2.2inchesPCIe Ethernet Card: Supports 10/100/1000Mbps/2.5Gbps/5Gbps speedCompatible for X1,X4,X8,X16, both a standard and low-profile bracket are providedWarm Tips:☺The PCIe interface compatible with PCI-E slots only, not for PCI slots.☺We put plastic film on its PCI-e interface for protection before the product is shipped. Please remove it before connecting to the PC's PCI-e slot.Package Includes1 x 5Gbps PCIe Network Card1 x Low-Profile Bracket1 x USB Flash Drive2 x Screws1 x Quick Start Guide 10Gb-5G NIC-RTL8126 Arm Your PC with the WAVLINK 10G PCI Express Network CardFeaturing the high-performance AQC113C-B1 controller chip and utilizing cutting-edge 10G Base-T technology, this adapter offers speeds 10 times faster than conventional gigabit adapters. It supports backward compatibilitywith various data rates (10000/5000/2500/1000/100/10Mbps Base-T connections). Alongside the standard bracket,a low-profile bracket is included for mini-tower computer cases.Excellent Heat SinkOrgan cooler design for fast heat dissipation and stable network card performance.AQC113C-B1 ChipsetIt enhances data transfer speeds, supports various data rates, and provides stable and reliable network transmissions.Seamless Upgrade, No Cable ChangesThis card works with CAT5E cables, eliminating the requirement for expensive CAT6 cables.USB Flash Drive IncludedUsers can simply plug in the USB drive to install the driver and start using it without any complicated procedures.Installation Steps1. Power off the PC, open the case, find one available PCIe slot.2. Insert the PCIe into the corresponding slot. Works with PCIe x1, x4, x8, x16.3. Fix the baffle with screws and insert an ethernet cable to the RJ45 port. 4. Insert the USB flash drive to install the driver. Setup is done.SpecificationModel: WL-NWP004Chipset: AQC113C-BExtend Port: 1* RJ45 Ethernet portItem Weight: 74g/2.6ozLED: 1 x Link(Green), 1 x Ethernet (Yellow)Operating System : Windows 11/10, Linux 3.10 and higherProduct Dimensions: 120*94*58mm/4.7*3.7*2.3inchesPCIe Ethernet Card: Supports 10/100/1000Mbps/2.5Gbps/5Gbps/10Gbps speedCompatible for X1,X4,X8,X16, both a standard and low-profile bracket are providedWarm Tips:☺The PCIe interface compatible with PCI-E slots only, not for PCI slots.Package Includes1 x 10Gbps PCIe Network Card1 x Low-Profile Bracket1 x USB Flash Drive2 x Screws1 x Quick Start Guide1 x CD-Shaped Card for Driver Download Links1 x Safety Information