Large O Gauge Trestle Bridge 9 Ft, 3-1/2" x 9-3/4" (Loc A + Left)

There is a photo that shows white Styrofoam under the bridge . That is because the bridge ends will not fit on the table without going onto the top of the pool table bumpers. The Styrofoam is to keep it level all the way across. the pool table and the styrofoam does not come with the bridge. O GAGE BRIDGE Overall height from ground to top of stringers is 9-3/4" high. Overall length of bridge is 9 ft --3-1/4" Lg" from outside of one abutment to the outside of the other. Distance from the ground to the underside of both deck bridges is 6-5/8", This bridge is made in our shop in its entirety and stained with our own non toxic, odorless weathering stain that will not rub off and is non toxic. It is made from two sizes of lumber, 1/4" square stock and 1/16 x 1/4 flat stock. COMES FULLY ASSEMBLED in FIVE PIECES - 2 trestle sections on either end and one trestle section in the center with two deck bridges about 12" lg each. All sections are

color coded for easy assembly. Bridge cannot be assembled incorrectly as it will only fit together one way. Assembly can be accomplished in a few minutes. During assembly of your bridge, glue it together by section at the contact joints and immediately ensure the bridge is perfectly straight. A long straight edge at the base extending the length of the bridge is the most accurate way to insure it is straight. Pick your bridge up by holding with two hands, one on each long end section. Never pick up your bridge up with one hand. Once installed, this bridge will hold any solid brass engine on the market. This bridge has 1102 hand cut, hand glued, pieces of wood, of which vary in lengths up to about 30" long. Ships in a package 10" x 30" x 36" lg Please read our reviews