Metric Coarse M 2.5 x 0.45 2.5 mm Hand Taps Serial Form
Check the listing for details.
| Location | Pulborough, West Sussex GB |
| Shipping | USD 5.39 · Flat |
| Seller |
davethetools
99.8% positive · 49763 feedback
|
| Listing | FixedPriceItem · Active |
| Start time | 2016-06-13T08:07:42.000Z |
| End time | 2024-02-13T09:07:42.000Z |
| Time left | P11DT10H29M18S |
| Restocking Fee | No |
| Return shipping will be paid by | Seller |
| Returns Accepted | Returns Accepted |
| Item must be returned within | 60 Days |
| Refund will be given as | Money Back |
| Brand | Volkel |
| Manufacturer Part Number | Does Not Apply |
| Country/Region of Manufacture | Germany |
Untitled DocumentMetric Coarse M 2.5 x 0.45 2.5 mm Hand Taps Serial Form Taps are to din 352 HSS-G Tolerance ISO2/6H This form of Hand Tap consists of 3 taps for Metric Coarse threads made up of a Roughing Tap a Mid Rougher and a Finishing tap (see below for more information). This form of tap is ideal for tougher materials because the thread is formed in stages as opposed to NON
serial taps which form the thread in one pass and use the conventional Taper Second and plug. The roughing tap which takes out half the thread area is marked with a ring on the shank for identification. The Mid-Rougher which takes out to 75% of the area of the thread is marked with two rings on the shank. Only the plain shanked Finish tap cuts SIZE. This form of hand tap is recommended for materials like stainless steel and non-abrasive materials up to 900N/mm2 Metric Coarse M 2.5 x 0.45 2.5 mm Hand Taps Serial Form Taps are to din 352 HSS-G Tolerance ISO2/6H This form of Hand Tap consists of 3 taps for Metric Coarse threads made up of a Roughing Tap a Mid Rougher and a Finishing tap (see below for more information). This form of tap is ideal for tougher materials because the thread is formed in stages as opposed to NON
serial taps which form the thread in one pass and use the conventional Taper Second and plug. The roughing tap which takes out half the thread area is marked with a ring on the shank for identification. The Mid-Rougher which takes out to 75% of the area of the thread is marked with two rings on the shank. Only the plain shanked Finish tap cuts SIZE. This form of hand tap is recommended for materials like stainless steel and
