2pcs STC-1000 AC 110V-220V Digital Temperature Controller Thermostat With Sensor

Product Description 2PCS STC-1000 Digital Temperature Controller NTC Sensor AC 110V-220V Product Characteristics A compact and lightweight design. 2. Large and clear liquid crystal display screen. 3. Wide temperature range (-50 to 99℃). 4.heating and cooling functions. 5. Control the temperature by setting the temperature set value and different values. 6. Temperature calibration. 7. Refrigeration control output delay protection. 8. Including the installation wiring diagram. This product uses Celsius to represent temperature. Excellent Performance: This mini thermostat is a multi-functional aquarium temperature control device with excellent performance and convenient use. The stability of the aquarium temperature is one of the key factors affecting the health and safety of fish. An Environment That Provides The Best Temperature For Fish: By using a temperature controller, you can provide your fish with the best temperature environment. This advanced temperature controller can measure and control temperatures ranging from -50 to 99℃. This device is also suitable for laboratory use and other temperature control systems. Product Specification Condition: 100%

Brand New Material: ABS Colour: Black Purpose: Indoor Display Type: Red LED strip Sensor: NTC sensor (1M) Uses: Aquariums, glass breeding boxes, animal breeding boxes, amphibious ecological tanks, etc Style: Modular standing Display Size: 1.2" Sensor: NTC sensor Temperature Measurement Range: -50℃ to 99℃ Control Temperature Range: -50℃ to 99℃ (adjustable) Temperature Difference Control: 0.3℃ - 10℃ (adjustable) Humidity Resolution: 0.1℃ Accuracy: ±1℃ (-50℃ - 70℃) Sensor Failure Delay: 1 minute Relay Output Capacity (Heating) : 10A (maximum) 250V Relay Output Capacity (Cooling) : 10A (maximum) 250V Compressor Delay Protection Time: 1 to 10 minutes (adjustable) Operating Temperature: 0℃ - 60℃ Storage Temperature: -30℃ to 75℃ Working Relative Humidity: 20-85% (no condensation) Power Supply: 110VAC to 220VAC ±10%, 50/60Hz Power Consumption: < 3W Cable Length: 2M (including probe length) Front Panel Dimensions: 75mm in length × 34.5mm in width Installation Opening Size: 71mm in length × 29mm in width Overall Dimensions: 75mm in length × 34.5mm in width × 85mm in depth Repair System Data After the temperature controller is powered on, first check if the parameter Settings are correct. If an error is detected, it will display "Er". At this point, pressing any key will restore the default parameter Settings and make it work normally. It is recommended to reset the parameters at this time. System Code, Causes And Actions Sensor fault alarm: When a short circuit or open circuit fault occurs in the temperature probe circuit, the temperature controller activates the probe fault alarm mode, turns off all execution states, and the digital tube displays "EE". After the fault is resolved, press any key to return to the normal working mode. Over-temperature limit alarm: When the temperature measurement exceeds the temperature measurement range, the temperature controller activates the over-temperature limit fault alarm mode, shuts down all execution states, and the digital tube displays "HH". When the temperature returns to the normal measurement range, press any key to return to the normal working mode. Safety Rules Danger: 1. Strictly distinguish the sensor leads, power lines and output relay interfaces. Do not connect them incorrectly and do not overload the relay. 2. All wiring changes must be made when the power is disconnected. Warning: This temperature controller must not be used in water or overly humid environments. It is also prohibited to use it in high-temperature, strong electromagnetic interference or highly corrosive environments. Note: The supply voltage should be consistent with the voltage marked on the temperature controller and ensure the stability of the supply voltage. To avoid possible interference, it is recommended that the sensor leads be kept at an appropriate distance from the power lines. Package Included 2 × STC-1000 Digital Temperature Controller Attention Please 1. Please allow manual measurement errors of 1-5mm. Make sure you don't mind before purchasing. 2. Due to lighting effects, display brightness and contrast Settings, etc., there may be some slight differences in tone between the picture and the actual object. Please make sure you don't mind.